-
CATALOGUES BY THEME
- Agricultural and sideline food processing industry
- Furniture manufacturing industry
- Appliance manufacturing industry
- Textile manufacturing
- Leather goods line
- Manufacturing industry of culture and education and sporting goods
- Manufacture of metal products
- Non - metallic mineral products industry
- Medical manufacturing industry
- Chemical manufacturing industry
- Communications, IT products manufacturing industry
- Environmental recycling industry
- Handicrafts and other manufacturing industries
- Electrical machinery and equipment manufacturing industry
- Plastic, rubber products industry
- Transportation equipment manufacturing industry
- Agricultural machinery
- Plastic molding equipment
- Die casting equipment
- CNC machining equipment
- Mechanical processing equipment
- Industrial robot
- Automation equipment
- Production line supporting equipment
- Non-standard equipment
- Other machinery
- Special equipment machinery manufacturing industry
-
- PRICES / QUOTE QUESTION DOCUMENTATION WHERE TO BUY
Automatic jam packing machineAutomatic jam packing machine
- Automatic jam packing machine
Description
The alternative: Vortex sensor instead of vane
Integrated temperature measurement
Electronically rotatable multi-colour display
Rotatable G and R process connections as option
Red/green colour change for process values adjustable
Can be used for water with and without conductivity (deionised water)
Turbulence as a measure for the flow
Behind a blunt body (or shedder) integrated in the measuring pipe, the flowing medium generates swirling vortices depending on the velocity. These vortices are detected by a piezoceramic sensor. If the cross-section is known, the number of the vortices allows to determine the flow rate.
This flow rate measurement principle, known as vortex (or vortex shedding) principle, is almost independent of pressure and temperature fluctuations of the medium. It allows a simple design and thus a low-cost production of sensors for flow rate measurement.
The current flow and temperature are output as standardised current signal (4...20 mA), as frequency signal, switching output or via IO-Link as option.
Integrated temperature measurement
Electronically rotatable multi-colour display
Rotatable G and R process connections as option
Red/green colour change for process values adjustable
Can be used for water with and without conductivity (deionised water)
Turbulence as a measure for the flow
Behind a blunt body (or shedder) integrated in the measuring pipe, the flowing medium generates swirling vortices depending on the velocity. These vortices are detected by a piezoceramic sensor. If the cross-section is known, the number of the vortices allows to determine the flow rate.
This flow rate measurement principle, known as vortex (or vortex shedding) principle, is almost independent of pressure and temperature fluctuations of the medium. It allows a simple design and thus a low-cost production of sensors for flow rate measurement.
The current flow and temperature are output as standardised current signal (4...20 mA), as frequency signal, switching output or via IO-Link as option.
LINE VIDEO
SINGLE PRODUCTS
PARTS
RAW MATERIAL
APPLICATION SCOPE
